Sales & Support: Request A Quote
Home ProductsLaminated Steel Plate

Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet

Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet

    • Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet
    • Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet
  • Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet

    Product Details:

    Place of Origin: China
    Brand Name: MK
    Model Number: MSP-G

    Payment & Shipping Terms:

    Minimum Order Quantity: 200 sheets
    Price: Negotiable
    Packaging Details: Strong plywood package with proper soft protection material inside, suitable for long distance for sea or air transport
    Delivery Time: 7-15 working days
    Payment Terms: L/C, D/A, D/P, T/T, Western Union
    Supply Ability: 30000sheets/week
    Contact Now
    Detailed Product Description
    Plate Size: A4, A3 Or As Per Customer's Demand Common Thickness: 0.6mm Or 0.8mm
    Dimension Tolerance: ±1mm For Length And Width Plate Flatness Level: Maximum 1 Mm.m
    Surface Roughness: Glossy Plate (Ra<0.03μm) Thickness Tolerance: ±0.05mm

    Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet

     

    Key Features:

    1. The two sides are covered with protection foils (blue thin films) to ensure good protection on both surfaces. There is no glue left after the foil is removed before the plate is used at the first time.

    2. Two sides are made glossy or matte in the same quality.

    3. There are no scratches, dents, stripes shadows and dust on plate surfaces.

    4. The edges are smooth and deburred with the round curved corners.

    5. After lamination, the plates are not sticking to the laminated plastic sheets.

    Plate size(L×W) A4, A3 or custom-made size
    Plate thickness 1.0 mm (Thickness tolerance: ±0.05mm)
    Dimension tolerance ±1mm for length and width.
    Plate flatness level: Plate flatness level:
    Surface pattern Glossy Finish
    Surface hardness HRC80±20
    Thermal transmission 0.04cal/℃.cm.sec at 20℃
    Packaging box solid plywood carton with soft cushion protection inside.
    Edge state smooth and deburred with the round curved corners

    Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet

     

    Technical Parameters:

    Plate size(L×W): A4, A3 or custom-made size

    Plate thickness: 0.6mm, 0.8mm (Thickness tolerance: ±0.05mm)

    Dimension tolerance: ±1mm for length and width.

    Plate flatness level: maximum 1 mm.m

    Surface roughness: Glossy plate (Ra<0.03μm)

    Glossy plate surface glossiness: over 800 GU at 20° (both sides)

    Surface hardness: HRC80±20

    Thermal transmission: 0.04cal/℃.cm.sec at 20℃

    Packaging box: solid plywood carton with soft cushion protection inside

    surface roughtness Ra value <Ra0.3μm
    Thickness range 600 or 800 micron
    Dimension tolerance ±1mm for length and width
    Edge state smooth and deburred with the round curved corners

    Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet

    Production process 

    The lamination steel plates apply the #430 cold rolled stainless steel plates with the thickness of 0.6 or 0.8 mm. The general production processes are summarized as below:

    Step1 Raw Material Selection: Hot rolled strip is used as a raw material for cold rolled stripe.

    Step 2 Scouring/Pickling: Use a pickling unit to remove iron oxide from the surface of hot rolled strip

    Step 3 Cold rolling: After multiple passes of cold rolling, the finished steel strips shall meet the size, shape and surface quality requirements.

    Step 4 Heat treatment: Annealing the cold rolled strip to achieve the desired properties.

    Step 5 Finishing: The final product is obtained by leveling, shearing and packaging the annealed strip steel coil

    Step 6 Flattening and film application: Release #430 stainless steel sheet coil, then flatten it on the flattening line, cut it into standard size stainless steel plate, and attach protective film on both sides of the steel plate to prevent scratches of the steel plate.

    Step 7 Tailor cutting: According to the size requirements of customers, the large steel plate is precisely cut by using the shearing machine.

    Step 8 Visual Inspection: Make a comprehensive inspection of each finished steel plate, check the dimension, thickness and surface quality, and eliminate unqualified products. If it is matte finish steel plate, according to customer's requirements, sandblasting machine is used on both sides of the steel plate to achieve matte finish effect, and then apply protection films on both sides before quality inspection.

    Step 9 Packaging and labeling: Packaging the qualified products by using fumigation-free wooden cases, and inside the wooden cases, the soft materials are applied to maximize the protection of steel plates during the process of handling and transportation. The proper label or logo is applied on the case surface before shipment.

    Anti Scratch 800 Micron HRC80 0.6mm Glossy Finish Card Laminated Steel Sheet

    Contact Details
    MKarte Material Technology Limited

    Tel: 86-022-6325-0610

    Send your inquiry directly to us (0 / 3000)