|Place of Origin:||CHINA|
|Minimum Order Quantity:||50 Sheets|
|Packaging Details:||Strong plywood package with proper soft protection material inside,suitable for long distance for sea or air transport|
|Delivery Time:||10-15 working days|
|Payment Terms:||D/A, L/C, , D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||3000Sheets per week|
|Dimension Tolerance:||±1mm For Length And Width||Plate Flatness Level:||Maximum 1 Mm.m|
|Surface Hardness:||HRC80±20||Shipping Term:||By Sea Or By Air|
|(Thickness Tolerance:||±0.05mm||Surface Pattern:||Special Pattern|
Scratch Proof A3 Size Patterned/textured Card Lamination Steel Plate
Special pattern lamination steel plates are mainly used for personalized pattern finish card lamination. It can well ensure perfect plastic card surface finish after lamination. Our plates are being widely used by many card factories in both China and foreign countries worldwide.
1. One side (pattern side) is covered with protection foils (blue thin films) to ensure good protection.
2. Only one side has the special pattern.
3. There are no scratches and dust on pattern surface.
4. The edges are smooth and deburred with the round curved corners.
|Plate size(L×W)||A4, A3 or custom-made size|
|Plate thickness||1.0 mm (Thickness tolerance: ±0.05mm)|
|Dimension tolerance||±1mm for length and width.|
|Plate flatness level:||Plate flatness level:|
|Surface pattern||Special Pattern|
|Thermal transmission||0.04cal/℃.cm.sec at 20℃|
|Packaging box||solid plywood carton with soft cushion protection inside.|
|Edge state||smooth and deburred with the round curved corners|
The general production processes are summarized as below:
Step1 Raw Material Selection : Hot rolled strip is used as a raw material for cold rolled stripe.
Step 2 Scouring/Pickling : Use a pickling unit to remove iron oxide from the surface of hot rolled strip
Step 3 Cold rolling : After multiple passes of cold rolling, the finished steel strips shall meet the size, shape and surface quality requirements.
Step 4 Heat treatment : Annealing the cold rolled strip to achieve the desired properties.
Step 5 Finishing: the final product is obtained by leveling, shearing and packaging the annealed strip steel coil
Step 6 Flattening and film application : Release #430 stainless steel sheet coil, then flatten it on the flattening line, cut it into standard size
stainless steel plate, and attach protective film on both sides of the steel plate to prevent scratches of the steel plate.
Step 7 Tailor cutting : According to the size requirements of customers, the large steel plate is precisely cut by using the shearing machine.
Step 8 Visual Inspection : Make a comprehensive inspection of each finished steel plate, check the dimension, thickness and surface quality, and eliminate unqualified products. If it is matte finish steel plate, according to customer's requirements, sandblasting machine is used on both sides of the steel plate to achieve matte finish effect, and then apply protection films on both sides before quality inspection.
Step 9 Packaging and labeling : Packaging the qualified products by using fumigation-free wooden cases, and inside the wooden cases, the soft materials are applied to maximize the protection of steel plates during the process of handling and transportation. The proper label or logo is applied on the case surface before shipment.